High Speed OM3 Fiber Optical MTP Trunk Cable MPO Patch Cord 12
Cores
1. What is the MPO/MTP features?
IEC61754-7 & GR-1435-CORE compliant.
Modular design, plug-locking structure,easy for test,Install,remove
and adjust. Usually,single MTP / MPO connectors typically can
accommodate 12 or more fiber, 1U height wiring space can
accommodate up to 96 LC optical interface, Section. Saving Cabinet
and rack space, easy cable management Kinds of fiber,cable
available,to meet different customer needs.
Can choice of male,female.Achieve precise positioning with the
adapter connected via Pin-pin positioning function,high stability.
Multi-core ferrule, small size, high speed and high capacity to
meet the needs of optical fiber communication systems and
high-efficiency high-density interconnect wiring. For future
network infrastructure, highly scalable, supports Ethernet and
Fiber Channel requirements 10/100-1Gbps.
2. What is the MPO/MTP type?
| male(with Pin),female(without Pin) |
| Ferrule type | Standard SM,Low loss SM;Standard MM,Low loss MM |
| Fiber core | 4core,8core,12core,24core |
| Housing color | Green(SM),Beige(MM),Yellow(SM Low loss),Blue( OM3 50/125 ) |
| Polishing way | PC,APC |
| Cable type | Ribbon cable,Ribbon fiber,3.0mm Mini cable(250um12F,24F),0.9mm
cable |
3. What is the MPO/MTP test requests?
a. Endface request:
| 400 X | Defect description | Allow quantity |
| Fiber(9um,50um,62.5um) | White scratches | ≤3um | No limited |
| Spot | ≤2um | 5 PCS |
| Defect | / | No allowed |
Cladding
(62.5-125um) | White scratches | ≤3um | No limited |
| | ≤5um | 1 PCS |
| Black scratches | ≤3um | 2 PCS |
| Black spot | ≤2um | No limited |
| | ≤5um | 3 PCS |
| Defect | ≤2um | Around no limited |
| | ≤15um | Total length is less than the side length 1/4 |
| Plastic ring | / | No limited |
b. Performance:
| MPO/MTP | SM standard ferrule | SM low loss ferrule | MM standard ferrule | MM low loss ferrule |
| IL Loss | Typical | 0.35dB | 0.20dB | 0.35dB | 0.20dB |
| Max | 0.75dB | 0.35dB | 0.65dB | 0.35dB |
| RL | APC≥50dB | | ≥ 25dB | ≥ 35dB |
| PC ≥ 40dB | | | |
| Repeatability | ≤0.30dB(Plug more than 500 times) | 0.30dB(Plug more than 1000 times) |
| Interchangeability | ≤0.30dB(With either a matching connector) |
| Tensile strength | ≤0.30dB(Maximum tension 66N) |
| Shock | ≤0.30dB(10~55Hz) |
| Temperature Range | -40°C ~ +75°C |
c. Interference indicators:
| MPO/MTP Connector | Dimension 3D Test |
| Radius of Curvature | X ≥2000mm ,Y ≥50mm |
| Fiber Height | 1000~4000 nm |
| Endface Angle | X ±0.3° ,Y ±0.3° |
| Core Dip | ±300nm |
d. Length Tolerance:
| Length(M) | Tolerance |
| ≤10 | + 10CM |
| 10<L≤30 | + 15CM |
| >30 | + 10%
|
FQA
F
Q1. Can I have a sample order
A: Yes, we welcome sample order to test and check quality. Mixed
samples are acceptable.
Q2. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 1-2 weeks for
order quantity more than
Q3. Do you have any MOQ limit?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5
days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our
suggestions.
Thirdly customer confirms the samples and places deposit for formal
order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on product?
A: Yes. Please inform us formally before our production and confirm
the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 1-2 years warranty to our products.
Q8: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control
system and the defective rate will be less than 0.2%.
Secondly, during the guarantee period, we will send new with new
order for small quantity. For defective batch products, we will
repair them and resend them to you or we can discuss the solution
including re-call according to real situation.
