Fiber Optic Patch Cord Manufacturing Machine For Central Pressure
Polishing
Features:
1. Machinable ceramics (including extreme hardness ZrO2), quartz,
glass, metal, plastic and other materials
2. Independent of rotation and revolution complex to ensure the
quality of the polishing uniformity and consistency. Revolution can
be stepless speed range of 15--240rpm, to meet the different
requirements of the grinding process
3. Corners pressurized design, grinding time can be set freely
according to the processing requirements
4. Polishing platen plane at the time of the revolution speed of
100rpm less than 0.015mm for the beating.
5. Automatically record the number of grinding, polishing can guide
the operator to adjust the time according to frequency of use of
abrasive paper
6. Pressure, unloading and convenient replacement of fixtures
abrasive sheet
7. Processing quality and stability, low repair rate, high
production efficiency (countable parallel production lines)
8. According to customer requirements increase or cancel reversing
function
9. The use of polymer waterproof materials, electrical and chassis
ensure waterproof seal.
10. According to customer requirements, design revolution speed
digital display for milling quality control.
| Machine size : | 240mm*350mm*470mm |
| Net weight:: | 20kg |
| Polish disc: | 110mm |
| Polish speed: | 0-120rpm |
| Power: | AC110/220 5060Hz |
| Insert loss | 0.2-0.3dB |
| Return loss | 50-60dB |
| Offset | 50um |
Maintenance
In order to keep the machine in stable and normal status, should
fulfill manitenance when the machine finish operating.
- After the machine finishes operating, or stop for certain time,
must clean all polishing liquid completely, otherwise the liquid
will get dry and leave hard stain, which will cause trouble for
next polishing.
- If the machine keeps no running for long time, need clean the
holder in ultra-sonic cleaner, then paste rusty-proof lubrication,
stored in specified tooling box.
- The lifetime of polishing paper is varied on paper’s specification
and polishing process.
- Should inspect lubrication status of moving parts and add
lubrication periodly, advice maintenance of lubrication,
rusty-proof paste with NLGIZ level lubrication monthly.
- Should inspect cooling fan, assure no stuck for dirt, clean dirt
and stain over fan to keep smooth cooling system.
- Observe belt’s tension: Open box, will be able to see belt
connected to gear moter, adjust motor-locating board’s position,
vary belt tension. If found polishing plate is unable to rotate
evenly or skid occur, then need tension the belt, but not
over-tension that bring over-load to driving structure and big
noise.
- Oberve lubrication under polishing plate, replace / add lubrication
periodly.
- Protect the polishing plate and brass-ring from contamination and
impact.
polish efficency and quality
The production line will be high productivity & quality that is
equiped with polishing machine and advanced no-touch fiber-interference instrument. Polishing with high quality sandpaper, strict process control
through glue-removing, rough-polishing, mid-polishing to fine
polishing, close surface inspection and quality monitor with fiber-interference instrument, HX-0806 helps customers achieve success.
Different central polishing jigs
